Sunday, November 3, 2019

Power and Politics Coursework Example | Topics and Well Written Essays - 250 words

Power and Politics - Coursework Example Some of these categories of power are applicable to President Obama. To start with is the legitimate power. The American people accept the fact that their president can make demands and those demands be met in accordance with the applicable law. Compliance by both Americans and non-Americas is expected when such demands are made. Obedience and law observance characterize this base of power. Obama’s leadership is highly regarded a superior skill, characterized by superior knowledge (Stewart & Haugaard, 2012, p.703). This grants Obama power based on his expertise. His respect by the American people has constituted to the President’s power in governance and leadership, especially due to his efforts to reform the U.S healthcare system. President Obama’s capacity to punish for noncompliance gives him coercive power. The president can impose punishments or bans to an observed scenario or phenomenon that jeopardizes his governance and

Friday, November 1, 2019

ETH501, Business Ethics, Mod 4 Case Assignment Essay

ETH501, Business Ethics, Mod 4 Case Assignment - Essay Example ation is presented to us in the rejection of the promotion test results by the New Haven CT for its fire department due to the lack of minority representation. This paper aims to understand the managerial and organizational performance consequences resulting from a demographic representation in the workforce. After carefully analyzing the arguments and evidences available, a conclusion shall be made on whether organizations should indeed undertake a demographic approach in determining the composition of their workforce. Representation is one of the basic tenets of social justice especially in a society priding itself of civility. Morality and ethics dictate that all members of society should have the opportunity to contribute to the development process. Power should be distributed and not confined to a few for democracy to persist. Carroll (1990) formalizes these concepts to two principles: the Golden Rule and the Disclosure Rule. The former takes root in religion and history and states that ‘if one wants to be fairly treated then one should treat others fairly too’. The Disclosure Rule states that if you are comfortable with decisions after asking yourself if you would mind if others were aware of them, the decision is probably ethical. Velasquez (1996) states that the respect for fundamental rights emanates from the principle of Rights Approach where people should be given the right to self-determination and adequate opportunities to do so. Public service organizations will find these ethical and moral obligations as enough motivational reasons to adapt demographic representation in the workplace. Nonetheless, idealistic principles can often be disregarded by prejudiced preferences and operational requirements. This is especially true in business settings where the desire for production, operational efficiency and sales volume often take priority rather than moral and ethical obligations. Adapting a demographically representative workforce must have

Wednesday, October 30, 2019

Blackface Essay Example | Topics and Well Written Essays - 1000 words

Blackface - Essay Example They wore woolly wigs on their heads, gloves for their hands and painted their lips in exaggeration. They also made use of either tail – coats or ragged clothes to highlight their totally transformed looks. Much later on, actual black artists took to the same art. Blackface minstrelsy played a very important and significant role in promoting racism worldwide through their racist perceptions and attitudes towards it. The greatest impact of Blackface on the community was â€Å"the precedent it established in the introduction of African American culture to an international audience, albeit through a distorted lens.† (Lott 1993, Watkins 1999) From a National level point of view, minstrelsy was the most popular form of art which was used to express themselves. There are multiple differences of opinions between scholars as to the authenticity leading to the social and cultural creations related to the Blackface practice. In this capacity, historian Robert Toll develops a perspective that reflects a relative ambivalence toward the institution of slavery in the North prior to the Civil War. The historian Eric Lott complicates the issue further by suggesting that Blackface minstrelsy were motivated by both â€Å"love and theft† of black culture. According to popular culture the North was regarded as being abolitionist and a champion of social justice during the Civil War; but contrary to this fact as demonstrated through the popularity of Blackface minstrel shows, there was clear evidence of the element of inferiority associated with individuals of African descent. What the Blackface minstrelsy shows reflected was the perceived unsophisticated nature of the entire African race compared to their European counterparts; the practice emphasized blacks falling short of white standards (67). Blackface minstrelsy made extensive use of malapropisms and puns and conducted their musical concerts while sitting in a wide

Monday, October 28, 2019

Store and retrive information Essay Example for Free

Store and retrive information Essay Understand processes and procedures for storing and retrieving information Explain the purpose of storing and retrieving required information: The reason you store information is so you when you need it in the future you can easily find it. Most companies have to either store documents in fire proof cabinet’s or on hard disks or any other electronic storage devices. Most companies have confidential files about the company, employees or customers that have to follow the data protection act. Describe different information systems and their main features: Server on the server at our company we use the server to store all are files for example financial data, HR files, sage and accounts, maintenance, training, HSBC, customers, employees, etc. these are all in relevant files so you can locate them easily. GX – our bespoke system saves all of the work that we have processed so you can locate them by going on to contracts and finding the relevant customer’s and looking what they have had from when they joined with our company and we can also look back in the past to see how much we have made and how many pieces we have sent out. Explain the purpose of legal and organizational requirements for the security and confidentiality of information: Information that is stored in an organisation has to follow the security and confidentiality procedures. For example finances, customer’s and employee’s details should be secured and only certain members of staff should be able to access physical and electronic data unless you have been given authorisation. If information gets into the wrong hands it could have serious consequences and might lead to legal action. Explain the purpose of confirming information to be stored and retrieved: All companies store a lot of information, but if you store the wrong information that isn’t up to date or is not correct there is no use of it. So when storing information you should be cautious that it is proof read. You keep information for a reason so you should keep everything updated. The wrong information can be really serious if it falls in to wrong hands. Read more:  Store and Retrieve Information Essay Describe ways of checking information for accuracy: When you are saving important information it is essential that you proof read it, or if you are not sure get someone to double check it, as you only want accurate data. By using decent software to store database will help ensure  that the information is accurate. Explain the purpose of checking information for accuracy: All organisations have to check to make sure that there information is correct because if one thing is wrong for example in the financial department if the money that is coming in and going out is inaccurate, this might lead to staff might not get paid correctly or you haven’t got enough money to pay either staff or employers. Explain the purpose of providing information to agreed format and timescales: By having an agreed format in an organisation is called a house style by using a house style it will let other companies or customers identify who you are, for example by the font, logo, font size, emphasis and spacing. By not having this you don’t look very professional and will make things take longer if you have to use extra time making it right. By having a timescale will let staff and customers know when work will be completed by over running the timescale will make the company look unorganised and not very professional. Describe the types of information that may be deleted: As a company goes on your will get more and more customers and might have some customers leave your company so you should always check the data and making sure it is accurate, so you don’t have any unwanted data. Most companies will have a policy on how long you should store data for and after that time it should be deleted or shredded following security and confidentiality procedures. Describe problems that may occur with information systems and how to deal with them, when necessary: When storing important information there is always going to be a risk whether it is saved onto a computer or it is physical because computers get viruses from attackers so you should always make sure that you have got proper security like antivirus software and firewalls need to be used as well as passwords. When you have physical information there is always a risk that there could be a fire or flood, or information can be seen by the wrong person who do not have authority to access information. You should always have locks and maybe even a fire proof cabinet for important documents.

Saturday, October 26, 2019

The Definition Of Definitions :: essays research papers

<a href="http://www.geocities.com/vaksam/">Sam Vaknin's Psychology, Philosophy, Economics and Foreign Affairs Web Sites The sentence â€Å"all cats are black† is evidently untrue even if only one cat in the whole universe were to be white. Thus, the property â€Å"being black† cannot form a part of the definition of a cat. The lesson to be learnt is that definitions must be universal. They must apply to all the members of a defined set (the set of â€Å"all cats† in our example). Let us try to define a chair. In doing so we are trying to capture the essence of being a chair, its â€Å"chairness†. It is chairness that is defined – not this or that specific chair. We want to be able to identify chairness whenever and wherever we come across it. But chairness cannot be captured without somehow tackling and including the uses of a chair – what is it made for, what does it do or help to do. In other words, a definition must include an operative part, a function. In many cases the function of the Definiendum (the term defined) constitutes its meaning. The function of a vinyl record is its meaning. It has no meaning outside its function. The Definiens (the expression supplying the definition) of a vinyl record both encompasses and consists of its function or use. Yet, can a vinyl record be defined in vacuum, without incorporating the record player in the definiens? After all, a vinyl record is an object containing audio information decoded by a record player. Without the â€Å"record player† bit, the definiens becomes ambiguous. It can fit an audio cassette, or a compact disc. So, the context is essential. A good definition includes a context, which serves to alleviate ambiguity. Ostensibly, the more details provided in the definition – the less ambiguous it becomes. But this is not true. Actually, the more details provided the more prone is the definition to be ambiguous. A definition must strive to be both minimal and aesthetic. In this sense it is much like a scientific theory. It talks about the match or the correlation between language and reality. Reality is parsimonious and to reflect it, definitions must be as parsimonious as it is. Let us summarize the characteristics of a good definition and then apply them and try to define a few very mundane terms. First, a definition must reveal the meaning of the term or concept defined.

Thursday, October 24, 2019

Concealed Carry Right Should be limited Essay

Because of the establishment of concealed carry legislation by all states over the years, it has been increasingly possible for almost every American citizen to carry concealed weapons in public places. As unfortunate and horrifying gun violence tragedies like the Newtown School Shooting and Sandy Hook school shooting repeatedly occur, whether citizens should have the right to carry a conceal handgun in public has created a massive uproar. People have different views about this issue. Just as the Second Amendment states that every human being has the constitutional right to keep and bear arms, many gun-rights advocates believe that reasonable citizens have the right to carry any kind of concealed weapons for self-defense purposes. On the other hand, people who argue against the right of concealed carrying claim that the Second Amendment does not state that law-abiding citizens are allowed to carry concealed guns in public and they may consider concealed handguns as an inefficient for m for defense purpose as it creates more chances for potential crimes and injuries. As you can see, both sides have made very strong argument. Even though citizens without criminal records have the constitution right to keep and bear firearms, citizens’ rights to carry concealed handguns should come with limitations outside the home. In general, allowing individuals to carry concealed weapons does not benefit both of them, citizens and the public since it is not effective for self-defense and creates more chances for gun violence. To begin with, the United States has always been a nation of individuality. In the past, all Americans advocated armed self-defense to fight for liberation and to protect their lives from violence. In the era of emancipation, writers such as WEB Du Bois also supported that guns are necessary tools to defend African Americans’ lives. Hence it is not surprising that gun ownership is legalized in the United States. Needless to say, guns have become a part of American culture. However, when hearing news of mass shootings recently, most people from outside the United States think they must have happened in the United States. And it is because the majority of the deadliest mass killings in the world took place in the United States in the past few years.  Accordingly, a comparison study on twenty-six developed countries that held by the Harvard Injury Control Research Center at the Harvard School of Public Health showed that the United States has the highest level of gun ownership per capita and also has the highest rate of gun homicides. (Bagnall) Guns increase the gun violence in the society and further infringe on the base philosophy security of the United States. Lao-Tzu’s philosophies create persuasive argument on gun issues. As he suggested in Tao-te Ching â€Å"weapons are the tools of violence; all decent men detest them. Weapons are the tools of fear; a decent man will avoid them except in the direst necessity and, if compelled, will use th em only with the utmost restraint† In his opinion, law-abiding citizens should have no need for weapons. If people were unable to carry concealed guns, there would be probably less need for protection by concealed weapons. The goal for the society is to reduce violence as much as possible. As a matter of fact, allowing unstable people to carry concealed guns in public makes it easier for them to use guns to commit as many gun-related crimes in public as possible. Janet Bagnall, a columnist who writes for the Times and Colonist Newspaper has made a strong argument that â€Å"where guns were more available, there were more homicides.† Carrying concealed gun is not a way to protect people, but to put other people at risk of an injury or even death as it increase chances that people shoot each other when they are intoxicated, nervous, or irritable. Precedent Obama was quoted in an Apr. 2, 2008 article saying, â€Å"I am not in favor of concealed weapons. I think that creates a potential atmosphere where more innocent people could (get shot during) altercations.† (ProCon) A per son from other countries such as England or Costa Rica or Japan is less likely shoot and kill someone when he has the impulse to do so since lethal weapons are not easily accessible in those countries. However, it might be easier for that person to misuse his guns and be involved in criminal activity if the person happen to be an American citizen and own a murderous weapon, as America is a country flooded with guns. The high gun owner rate makes guns more accessible for criminals. In addition, people with concealed weapons even kill many more people in cheaper, quicker, and easier ways than if they did not have handguns. For instance, the shooting spree on the campus of Virginia Tech that killed thirty-two people was less likely to happened or killed less people if the  gunman couldn’t carry a handgun. It is true that â€Å"guns did not kill people, people kill people.† Since handgun is primarily designed to kill people and not for sport or other purposes, it is not a toy that should be carried in a person’s purse. It is true that the high ownership of guns is out there in the United States, and no one can guarantee that it can be completely reduced by bannin g concealed carry. However it would stop insane and violent people from using guns easily in public places and then gradually reduce gun violence. What is more, concealed weapons are not effective for self-defense in bars, theaters and other public places. Many people with concealed guns are more likely to be attacked than a victim who has no gun, as they are not properly trained on conflict resolution and thus unable to fight back to the attacker or to solve the conflicts. For instance, just imagine what would happen if guns were taken away from citizens and used to overpower them or other people in public places? According to the data sets that were provided by the Violence Policy Center, only 0.8 percent of victims of both attempted and completed violent crimes involved using guns as self-defense behavior between years 2007 and 2011. The most reliable data show that guns were used only 338,700 times in self-defense, and this includes off-duty police. Truly handguns deter criminals from committing crimes such as burglary in people’s homes. Given that there are more than 300 millions guns in the United States, it is impossible to suggest that guns are an effective form for self-defense in public. Allowing citizens to carry a concealed handgun does not lessen the chance of being attacked. Instead, it increases the chances of unintended public shootings. Aristotle made a strong argument in the Nicomachean Ethics, a wise man will never put himself into needless danger. Carrying guns will never be intelligent action as it potentially put one’s lives into danger. If citizens are permitted to carry concealed guns in public areas, criminals are also more likely to be armed. The reason is that there is always a chance that victims would be armed. Moreover, killing with guns is not necessary even it is for self-defense. Applying Aristotle’s virtue ethics, living is necessary to be happy. Caring about others is human nature as people are social animals. But killing with guns will absolutely unnecessary for personal happiness as it may lead to horrible thing happen on other people. Gun violence is not the only way to fight against violence. There are still many other ways that citizens can defend themselves in  public. Most important, the Second Amendment limits the concealed carry right. Every constitutional right comes with reasonable restrictions when it begins to threaten the nation and other citizens. In other words, although individuals’ freedom of religious belief is advocated by the constitution, they are still not allowed to practice human sacrifice, as it is a violation of human rights. In the same manner, individuals can get themselves into troubles of libel and slander, defamation even though they have freedom of speech. Hence gun rights are not an exception either. It is true that the Second Amendment guarantees that individuals with clean records are allowed keeping arms for defending themselves and their property lawfully at homes. The law clearly states that reasonable citizens have the right to bear arms and keep the government secure. But it does not mean that they can carry guns everywhere. According to Adam Cohen who is a former member of the New York Times editorial board, the Supreme Court in Heller declared â€Å"America has a long tradition of bans on concealed weapons – and of courts upholding them.† Therefore, the Second Amendment does not extend to the right to carry a concealed weapon in public. Law-biding citizens can keep their guns at home and that is enough. Guns do not make sense for solving problems and are not going to not make today’s society better. To sum up, carrying concealed weapons in public threatesn the constitutional order. Recent mass shootings have become one portion of the long-term trend of gun violence in the United States. As mentioned above, the dangers of concealed weapons in public places are something that should no longer be ignored. Without doubt, there are only two reasons for carrying guns in public. One is to prevent individuals from danger and another is to commit a crime. If everyone are not allow to carry concealed handguns in public places, then why is there a need for individuals to carry guns? Though it is unlikely that the debate between gun ownership and concealed carry rights will ever end; one thing is certain, legalizing concealed carry may obviously cause more lethal crimes to occur. The American political system needs to find a balance between security and freedom. Banning concealed carry is something the federal government of America should take into considerations. Work Cited ProCon.org. (2014, October 28). Concealed Guns ProCon.org. Retrieved from http://concealedguns.procon.org/ Bagnall, J. (23, December 12). Column: Gun laws make a difference in mass killings. Retrieved November 17, 2014, from http://www.timescolonist.com/opinion/columnists/column-gun-laws-make-a-difference-in-mass-killings-1.32450 Lao-Tzu. Tao Te Ching. Retrieved November 18, 2014, from http://taoism.net/ttc/complete.htm Guns are Rarely Used to Kill Criminals or Stop Crimes New VPC Analysis Reveals. (2013, April 15). Retrieved November 17, 2014, from http://www.vpc.org/press/1304self.htm Ross, W.D. Nicomachean Ethics by Aristotle. Retrieved November 20, 2014, from http://classics.mit.edu/Aristotle/nicomachaen.2.ii.html Cohen, A. (2013, March 4). The Next Gun Control Battle: A Right To Carry Firearms in Public? Retrieved November 18, 2014, from http://ideas.time.com/2013/03/04/the- next-gun-control-battle-a-right-to-carry-firearms-in-public/

Wednesday, October 23, 2019

Static or Dynamic Checkpoint

* As a network administrator for a company, you want to configure an IP route between two routers. Of static and dynamic routing, which is more appropriate? A router is a device that connects two LANs or WANs together. It has the ability to determine the best known route to send packets to a destination. The factors used to determine the best known route include not only the fastest route, but the most efficient.By using routing tables the router can determine the route with the least amount of congestion or traffic, as well as the safest route for the packets to travel. It doesn’t always mean it’s the fastest route to the destination, but it is the most efficient. A router can be manually programmed by the network administrator to provide the most efficient route. This is called static routing. In this type of routing, the network administrator manually determines the best mappings to each destination before the routing begins.This is a finite form of routing. Once the network administrator programs the routers, there is no change in the routing pattern unless it is reprogrammed to a new route. If the pattern runs through a congested network area, a router in the pattern is not functioning properly, or part of the network is down, the router continues to try the same pattern because that is all it is programmed to remember. For today’s larger networks, an unforgiving router mapping is not necessarily the most efficient way of passing information within the network.When routing dynamically, software is used to program a router to be forgiving. This means that the router remembers the best or most efficient path, but if that path is not working, it will try the next most efficient route. The router is able to do this by remembering the routing tables most often used in the network. A dynamic router needs very little maintenance because it automatically remembers the network routing protocols as they are used. If a path is congested or a oute r is down, it uses the remembered routing tables to find the next best route without any manual programming. This type of dynamic routing is fault tolerant. It not only senses the usual route is not efficient, but it shares the information among routers on the internetwork so that all routers are aware of the new route. In the above scenario, as a network administrator in the present time, I would choose to configure an IP route between two routers dynamically.I believe it is more appropriate to route packets in the most efficient manner, and by routing dynamically this will happen automatically, and without any knowledge by the end user. The network administrator will only have to do the initial programming of the router, and the rest is done by the router itself. As a network administrator, not having to program each path a router will take, will free up time for other projects. In the given scenario, routing the network dynamically is the most appropriate choice.

Tuesday, October 22, 2019

The Event of the Century DDay essays

The Event of the Century DDay essays In every nation of the world, an event takes place that could change the course of history in that country. This event could change the history for better or for worse. For the United States, D-Day is one such transpiration. After this one specific invasion on June 6, 1944, everyone involved knew that it would change the course of history for the United States and the rest of the world. The invasion, known also by the code name Operation Overlord, did not, however, only consist of one day's events. These complicated one day's events did make up D-Day but the months of planning for the invasion and the changes in World War II and the rest of history also make up the structure of D-Day. To understand D-Day, a person must first understand the years of events that preceded the invasion. The story of D-Day began when World War II began in Europe. The cause of the war started with the alliance of Germany, under the control of the Nazi party, and Italy, which was under the control of the fascist regime.1 The leader of Germany at this time was Adolf Hitler, while Benito Mussolini led Italy. Before the beginning of the war, Germany and Italy, also self-proclaimed as the Axis powers, invaded a section of Czechoslovakia called the Sudetenland. France, England, and the United States were not happy with this but were willing to hold off on going to war to stop the Axis Powers. At this time, the leaders of the main countries outside of the Axis Powers were Franklin Roosevelt, Edouard Daladier, Joseph Stalin, and Winston Churchill, for the United States, France, the Soviet Union, and the United Kingdom, respectively.2 These four countries, however, would not silently watch the Axis Powers invade all of Europe. France and England made an agreement with Poland that stated that if Germany or Italy should invade Poland, both France and England would enter the war in defense of Poland. Although Hitler and Mussolini both knew of the agr...

Monday, October 21, 2019

Cool Music Girls essays

Cool Music Girls essays Lately I have been interested in girl singers. Such singers as Madonna, Cindy Lauper, Pat Benetar, Pink, Jewel, and so on. Their music inspires me. So, while I was looking for a topic for class, I noticed an article called 'Cool music girls". It's about six bold chicks who march to their own beat. Each girl has her own way of singing. They all have a CD out. Their ages range from 22 to 31, so they're not teeny boppers. They explain how they became interested in what they write/sing about. Neko Case is 31. She has been writing songs since she was 15. Her album "Blacklisted" gives off the feeling of lost and homesick. Lamya is 28. She started writing songs at age 11. Her big inflences are writers not musicians. She writes classical and lyrical. Norah Jones is 22. She dropped out of college her sophmore year and moved to the Big Apple. Started singing in local gigs and finally got signed to Blue Note Records. Her deput CD, Come Away with Me, combines jazz with pop, with a little Texas twang. Rosey is 29. Her lead track from her debut Cd, Dirty Child is about trying to fing the perfect love in your self, rather in other people. Aimee Allen is 29. Last year she scored a deal with Elektra Records. Her deput album is called "I'd Start A Revolution If I Could Only Get Up Last but not least, Shelia Nicholls, age 29. Left her tiny town in England to Las Angeles at 19. She worked her butt off to get where she is today. Her latest CD, "Wake" shows off her emotionally charged singer- ...

Sunday, October 20, 2019

Definition of Room Temperature

Definition of Room Temperature To the average person, room temperature is the thermometer reading of the room. In science and industry, the temperature is defined. However, not everyone uses the same value: Room Temperature Definition Room temperature is a range of temperatures that denote comfortable habitation for humans. Over this temperature range, a person isnt either hot or cold when wearing ordinary clothing. The definition of the temperature range is somewhat different for science and engineering compared with climate control. For climate control, the range is also different depending on whether its summer or winter.In science, 300 K can also be used as room temperature for easy calculations when using absolute temperature. Other common values are 298 K (25 °C or  77  Ã‚ °F) and 293 K (20 °C or  68  Ã‚ °F). For climate control, a typical room temperature range is anywhere from  15  Ã‚ °C (59  Ã‚ °F) and 25  Ã‚ °C (77  Ã‚ °F). People tend to accept a slightly higher room temperature in the summer and lower value in the winter, based on the clothing they would wear outdoors. Room Temperature Versus Ambient Temperature Ambient temperature refers to the temperature of the surroundings. This may or may not be a comfortable room temperature.

Saturday, October 19, 2019

Service Improvement Initiative Essay Example | Topics and Well Written Essays - 2000 words

Service Improvement Initiative - Essay Example The observation and information gathering process was focused on information such as various quantities in various containers and coming up with the short-notes on the guide. In addition, a period of four months was taken for the project trial using prototype short-notes which were followed by regular nurses meetings to discuss and monitor its progress. Resources Used Past and present fluid balance charts are essential in carrying out an audit to assess the effectiveness and in aiding better documentation. There was also the use of a measuring scale to determine the correct quantities in the containers. In addition, there was the utilization of excel application to generate the table used to enter the data for ease of comparison and analysis. Finally, there was the utilization of colour printer and laminating machines to print and prepare robust short notes. Who Was Involved The people who were involved include nurses and the entire team of healthcare professional assistants as well as other members from multi-professional field like the registrars, dieticians, occupational therapists and physiotherapists. Outcome/ Evaluation The fluid balance charts illustrate a better documentation of the fluid information. ... Finally, I intend to broadcast this idea for all healthcare workers. Introduction Haematology entails studying the blood, blood diseases, and the organs which form blood. Haematology also entails the study of diagnosis, prognosis, etiology, prevention, and treatment, and prognosis of blood diseases which affect the making of blood and its elements, for example, blood proteins, haemoglobin, blood cells, and the mechanism of coagulation (Nathan, Orkin, Ginsburg & Look 2003, p. 12). Health expert’s daily responsibility largely entails the treatment and care of patients suffering from haematological diseases (Department of Health 2007, p. 31). Fluid care is essential for people suffering from haematological diseases. Fluid management helps in the reinstatement of circulating volume and adequate management of blood element replacement. Also, haematopathologists and haematologists usually work together to develop a diagnosis and provide the most adequate therapy if required. This pa per will look at a service improvement initiative within the haematology ward (Chin 2008, p. 54). The paper will examine a service improvement initiative that I hope will be helpful for patients in the haematology ward. This point of view was initially highlighted when talking about my pledge with my mentor. My pledge is to always keep my patients hydrated. In addition, the conversation assisted me to develop a strategy utilizing the NOLAN technique, PDSA (Plan Do Study Act) so as to facilitate the service improvement. The paper will go on to evaluate a number of theoretical aspects including change Management, accountability and responsibility,

Friday, October 18, 2019

Statistical Tests Essay Example | Topics and Well Written Essays - 500 words

Statistical Tests - Essay Example When and if the researcher would test the boys before and after treatment for depression this would skew the two tests and the results would be more positive for the treatment would affect the outcome of the second test. The first test when the boys were depressed they would not put all their thinking skills into doing an honest job for the way they are feeling at that time. When testing boys and girls with depression the researcher must take into consideration other circumstances into performing the test. The repeated measures test is still the best t-test to use for this test will give the researcher a better look at the emotions of the boys through observation while performing the test. They can also observe facial and body movements of the participants. In all psychological testing researchers must strive for validity and to make sure the criteria is met before performing the test along with the reliability of the results found. The researcher can also use the single sample t-test when checking the boys after treatment they received for depression. They also need to find the degrees of freedom dealing with the participants from the previous sample. The researchers could also perform a paired samples t-test between the girls and the boys to see about levels of self esteem and with the paired samples t-test this is when Cohen’s d is used. The tester will also need to calculate the effect size and get the sample mean difference. When testers give these types of tests they should make sure that they are appropriate, meaningful and useful. (Gregory, 2004) When dealing with the statistics and the t-test researchers should strive to make ideas relevant to the test that is being performed. When considering which test or tests to be done one find the correct charts to make the necessary calculations. When researchers commit to doing this

Judicial precedent in english legal system (U.K) Essay

Judicial precedent in english legal system (U.K) - Essay Example Criminal justice systems in any country are meant to set forth a set of rules needed to enforce law and order. These systems give operating guidelines to the enforcers of the judiciary system of an open and democratic society, and can include minimum and maximum limitations for the sentencing of criminals. Now what is the doctrine of precedent in relation to laws It is important to understand that apart from the laws set forth to control the normal behaviour of people and to restrict the criminal activities and negative tendency of individuals in a society, certain other rulings are kept in effect. These are a set of guidelines which are not meant to ensure the rational development of the law. Rather they are meant to control the judges in terms of their honesty and rationality in making practical and professional decisions in the process of implementing the law. All judges are also human beings. Negativity exists in all human beings, and becoming a judge in no way ensures that the negative element of the person has been eliminated. We have heard of so many incidents where judges have taken bribes and given decision in favor of the bribing party, be that the prosecuting side or the defendant side.

Thursday, October 17, 2019

Developing Countries and Financial Liberalization Essay

Developing Countries and Financial Liberalization - Essay Example Asia has long been home to world’s most dynamic economies. The last decade has shown us a broad flowering of entrepreneurship throughout Asia in the face of different challenges. Factors attributed to this trend include a huge wave of private equity and venture capital funding, but more importantly, regulatory laws for financing and capital acquisition were eased and the less stringent rules governing the listing of young companies at the various stock markets helped in many companies getting the money they need for business (Robinson, 2005). The ease of getting loans and the financial liberalization process helped the growth of Pacific Rim for countries such as China, India, Hong Kong, Taiwan and even Japan. In particular, after the Second World War, Japan came to represent a model of economic development. Of course the massive gains made by the economy were based on the manufacturing of electronics and automobiles but the financial liberation process certainly helped the cou ntry gain its footings after the destruction it experienced (Herring, 2006). Similarly, Hong Kong has always been rated as one of the more free economies and even though it went through a change of government i.e. from Britain to China, it has retained the financially liberal attitude of the British economy rather than the controlled system of the Chinese. Taiwan can also be put on the list of countries benefiting from financial freedom. Although it has had a share of political instability and outright threats of invasion from China, it has led the way in semiconductor and IC manufacturing (Bremmer & Zakaria, 2006). Perhaps the biggest surprises resulting from the process of financial liberation are the giants that started emerging in the early 1990s, China and India (Hubbard, 2005).

Should the US gets itself involved in everything going on in the Research Paper

Should the US gets itself involved in everything going on in the middle east - Research Paper Example 78). This piece of research paper attempts to address how dangerously United States has been playing its diplomatic roles in the Middle East and explains five reasons why the US shouldn’t get involved in everything that go on in the region. This paper analyzes how the political languages the US repeatedly has been using like peace-making, anti-terrorism and weapon proliferation have but shown that they were absolutely meaningless due to the ongoing conflicts in the region, ever-increasing terrorism and devastating weaponry-political ideologies. Five reasons why the US shouldn’t involve in the Middle East United States shouldn’t play its diplomatic roles in military, political and all other activities that go on in the Middle East mainly for the following factors: 1. The main interest behind US’s involvement in the Middle East is to get wider access to oil-resources, which in turn can never be justified in terms of business or international politics. 2. Mid dle East is basically an Islamic region and therefore any involvement from the US side will be seen as an unnecessary involvement especially in religious affairs, and its interest in wars will be merely unjust. 3. As widely known, or as widely being debated in media worldwide, one of the main reason why US involves in the Middle East is to preserve the security and well-being of Israel (Pelletreau, p. 21), and therefore it will have a devastating impact on Middle East people’s perception of the US creating more hatred towards the US. 4. US involvement in Middle East will cause nothing more than giving excitement to the terrorists and thus making the region more vulnerable to ongoing conflicts and political instabilities. 5. The more the US gets involved in the Middle East, the highest the numbers of people, civilians and troops being killed in regions like Palestine, Iraq and other countries. Based on literatures and experts’ opinion, these reasons are detailed below: The US Interest in oil-resources When it comes to the case of recent war between Iraq and the US, for instance, the US gained full of oil resources that can help it fulfill its oil-requirements for years, where as Iraq lost their political and social stability in the country. As Krasner (p. 189) noted, the second World War has actually brought greater demand for oil and that bringing US attention to the Middle East as well. From 1940 onwards, America has been taking serious foreign policies to help it access oil from the Gulf countries. Pauly (p. 160) observed that Middle East has been a vital source for greater access to oil resources and this has brought the attention of the US foreign policy too. Without oil, many countries and many economies would face major disruptions. Similarly, the standard of living even will be greatly impacted if the US lacks oil resources and therefore America has increasingly intervened diplomatically, economically and militarily in the region. The ethi cal and moral sides of this intention and military operation can never be justified and therefore America should stop involving in the affairs OF Middle East. Involvement unjust Economical, diplomatic and military involvement of the US in the Middle Eas

Wednesday, October 16, 2019

Developing Countries and Financial Liberalization Essay

Developing Countries and Financial Liberalization - Essay Example Asia has long been home to world’s most dynamic economies. The last decade has shown us a broad flowering of entrepreneurship throughout Asia in the face of different challenges. Factors attributed to this trend include a huge wave of private equity and venture capital funding, but more importantly, regulatory laws for financing and capital acquisition were eased and the less stringent rules governing the listing of young companies at the various stock markets helped in many companies getting the money they need for business (Robinson, 2005). The ease of getting loans and the financial liberalization process helped the growth of Pacific Rim for countries such as China, India, Hong Kong, Taiwan and even Japan. In particular, after the Second World War, Japan came to represent a model of economic development. Of course the massive gains made by the economy were based on the manufacturing of electronics and automobiles but the financial liberation process certainly helped the cou ntry gain its footings after the destruction it experienced (Herring, 2006). Similarly, Hong Kong has always been rated as one of the more free economies and even though it went through a change of government i.e. from Britain to China, it has retained the financially liberal attitude of the British economy rather than the controlled system of the Chinese. Taiwan can also be put on the list of countries benefiting from financial freedom. Although it has had a share of political instability and outright threats of invasion from China, it has led the way in semiconductor and IC manufacturing (Bremmer & Zakaria, 2006). Perhaps the biggest surprises resulting from the process of financial liberation are the giants that started emerging in the early 1990s, China and India (Hubbard, 2005).

Tuesday, October 15, 2019

Macroeconomic Convergence, Development And Growth Essay

Macroeconomic Convergence, Development And Growth - Essay Example The convergence process is dependent on a large number of factors such as the population growth, speed of capital formation and the presence of efficient economic policies as well as appropriate financial institutions. Along with this the accumulation of human and physical capital are important as it significantly influences the savings and rate of investment (Halmai & Vasary, 2009, p.3). Technological spread, change in growth rate and total productivity of the factors are the major players in enhancing the rate of convergence (Halmai & Vasary, 2009, p.3). As per professor Jeffrey Sachs, countries following closed economic polies have not been successful in converging. The countries following closed economic policies had a growth rate of 2% whereas the countries following open economic policies have a growth rate of 4.5 %. As sited by many economists, endogenous rather than the exogenous factors triggers the growth of an economy (Alfaro et al, 2005). The Asian tigers such as Taiwan, Hong Kong, Singapore and South Korea have been successful in converging with the developed countries. An economy is said to have achieved economic growth, if it is able to produce more goods and services than what it used to produce initially. Economic growth is often related with technological progress. If an economy has achieved growth than the standard of living of its citizens also improves. In US, the economic growth occurred with the introduction of high technology in the country. Financial development also follows from the economic growth. This is due to the fact that if an economy is financially sound then its economy is also developed. Association between Economic Growth and Macroeconomic Convergence Economic growth takes place in a country whenever the resources are utilised more efficiently (Romer, 2007). As per the neoclassical growth theories, a country converges to its steady state rate, if there exists diminishing returns from investing in the physical capitals. Poore r economies have a greater tendency to converge owning to its high marginal productivity. This process of convergence which eventually leads in the equalisation of the per capita incomes amongst the countries is called absolute convergence. If for a country the convergence takes place both in terms of growth rate as well as income levels than the process becomes beta convergence. According to the idea of club convergence, if countries have similar initial conditions then they have a tendency to converge. This concept is regarded as sigma convergence. It is also emphasised that if the countries vary in their initial conditions then they will not converge, this could however be overcome if the economic policies could eliminate the variations. Solow growth model emphasise that such variations in a country’s economic policy cannot lead to long run economic growth (Romer, P, 2007). As the scatter plot alongside shows, the association between average annual growth rate and real GDP per capita need not be associated similarly for all nations, even though they are featured by similar initial characteristics. A country’s economic growth is measured by its level of technological progress. According to the endogenous growth theory, creation of enlarged market in an economy leads to a better utilisation of economies of scale. This on the other hand has a positive impact on a

Monday, October 14, 2019

Microsoft Excel Essay Example for Free

Microsoft Excel Essay F(x) = x2/36, for 0 thru 6, this is the distribution function that can be further simplified r1 = x2/36, to simplify set the equation equal to r1 x = 6 * SQRT (r1), final equation. Lost Revenue Jet Copies demonstrates a uniform probability distribution as it pertains to the number of copies sold per day. The average sale is between 2,000 through 8,000 copies a day, at $0. 10 a copy. This number is denoted on the excel spreadsheet as r3 by generating a random number between 2,000 and 8,000. To calculate the total amount of business lost on any given day, the following calculations utilized: Lost Revenue = repair time * r3 * 0. 10 The total amount of lost revenue is $20,166. 30. This number is not totally accurate, but is an approximation of lost. The amount will always change significantly because r1, r2, and r3 are numbers generated randomly. To get a close approximation the breakdown will have to consist of 365 to account for the total days in the year. Also, the lost revenue could be determined another way. Too calculate this amount, multiple the repair days and the estimated number of loss customers, multiplied by the number of copies that could have been produced, not exceeding 365 days. It will benefit Jet Copies to purchase a new copier. Their lost revenue exceeds the cost of purchasing a new copier by $12,166. 30. Jet Copies could afford to purchase two new copiers at the loss Jet â€Å"Copies will experience. The answer illustrated in the excel spreadsheet I am very confident with. Regardless of how many times I run the simulation, the numbers will never be the same because they are random. There are many limits to the study. First, the time up to a year will not always be accurate. Also, if you change one number, the whole spreadsheet numbers change. But of most importance, the simulation needs to be generated several times to come as close to accurate as possible, concerning revenue loss. Jet Copies simulation results are located in the Excel document uploaded to assignment 1. Reference Taylor, B. M. (2010). Introduction to Management Science (10th ed. ). Upper Saddle River, NJ: Pearson/Prentice Hall.

Sunday, October 13, 2019

The Desktop Publishing DTP Computer Science Essay

The Desktop Publishing DTP Computer Science Essay Refers to the use of computers to design and publish books, brochures, newsletters, magazines and other printed pieces. DTP is really a combination of several different processes including word processing, graphic design, information design, output and pre-press technologies, and sometimes image manipulation. DTP centers around a page layout program. Typically, a layout program is used to import Texts created in word processing programs; Charts and graphs from Spreadsheet programs; drawings and illustrations created in CAD, Drawing or paint program is then used to combine and arrange them all on a page. It is this ability to manipulate so many different items and control how they are used that makes layout software so popular and useful. However, modern word processors also have publishing capabilities, meaning the line separating such programs from DTP software is becoming less clear. in general, though, powerful new publishing systems use high-quality scalable fonts and give you control over typographic features such as Kerning(adjusting the spaces between letters to achieve even, consistent spacing). Another key feature of DTP software is text flow the ability to put text around graphic objects in a variety of ways. Once composed, DTP documents are printers on a laser printer or on a high resolution imageaetter. for transfer to a commercial printer, their native page layout format (such as Adobe inDesing or QuarkXpress) or as PDF files. PDF stands for Portable Document Format and allows people to view, search and print documents exactly as the publisher intended, you don ´t need to have the software and the fonts used to create it. History Desktop publishing began in 1985 with the introduction of  Mac Publisher, the first  WYSIWYG  layout program, which ran on the original 128K  Macintosh  computer. (Desktop  typesetting, with only limited page makeup facilities, had arrived in 1978-9 with the introduction of   Text, and was extended in the early 1980s by  Latex.) The DTP market exploded in 1985 with the introduction in January of the  Apple  LaserWriter  printer, and later in July with the introduction of  PageMaker  software from  Aldus  which rapidly became the DTP industry standard software. The ability to create  WYSIWYG  page layouts on screen and then  print  pages at crisp 300  dpi  resolution was revolutionary for both the typesetting industry and the personal computer industry. Newspapers and other print publications made the move to DTP-based programs from older layout systems like  Atex  and other such programs in the early 1980s. The term desktop publishing is attributed to  Aldus Corporation  founder  Paul Brainerd[1], who sought a marketing catch-phrase to describe the small size and relative affordability of this suite of products in contrast to the expensive commercial  phototypesetting  equipment of the day. By the standards of today, early desktop publishing was a primitive affair. Users of the PageMaker-LaserWriter-Macintosh 512K system endured frequent software crashes, the Macs tiny 512 x 342 1-bit black and white screen, the inability to control  letter spacing,  kerning  (the addition or removal of space between individual characters in a piece of typeset text to improve its appearance or alter its fit) and other  typographic features, and discrepancies between the screen display and printed output. However, it was a revolutionary combination at the time, and was received with considerable acclaim. Behind-the-scenes technologies developed by  Adobe Systems  set the foundation for professional desktop publishing applications. The LaserWriter and LaserWriter Plus printers included high quality, scalable Adobe  PostScript-fonts built into their  ROM  memory. The LaserWriters  PostScript  capability allowed publication designers to proof files on a local printer then print the same file at DTP  service bureaus  using  optical resolution  600+ ppi PostScript-printers such as those from  Linotronic. Later, the  Macintosh II  was released which was much more suitable for desktop publishing because of its larger, color screen, support for multiple displays, greater RAM capacity and its  SCSI  storage interface which allowed fast, high-capacity hard drives to be attached to the system. Although Macintosh-based systems would continue to dominate the market, in 1986, the  GEM-based  Ventura Publisher  was introduced for  MS-DOS  computers. While PageMakers pasteboard metaphor closely simulated the process of creating layouts manually, Ventura Publisher automated the layout process through its use of tags/style sheets  and automatically generated indices and other body matter. This made it suitable for manuals and other long-format documents. Desktop publishing moved into the home market in 1986 with  Professional Page  for the  Amiga,  Publishing Partner  (now Page Stream) for the  Atari ST, GSTs  Timeworks Publisher  on the PC and Atari ST and  Calamus  for the  Atari TT030. Even for 8-bit computers like the  Apple II  and  Commodore 64  software was published: Home Publisher,  The Newsroom  and  geo Publish. During these early years, desktop publishing acquired a bad reputation from untrained users who created poorly-organized  ransom note effect  layouts criticisms that would be levied again against early  web  publishers a decade later. However, some were able to realize truly professional results. For example,  .info magazine  became the very first desktop-published, full-color, newsstand magazine in the last quarter of 1986, using a combination of Commodore  Amiga  computers, Professional Page desktop publishing software, and an  Agfa  Graphics typesetter.[2] Often considered a primary skill, increased accessibility to more user-friendly DTP software has made DTP a secondary skill to  art direction,  graphic design,  denvelopment, marketing,  administrative careers  and advanced high school literacy in thriving economies. DTP skill levels range from what may be learned in a few hours (e.g. learning how to put clip art in a word processor) to what requires a college education and years of experience (e.g.  advertising agency  positions). The discipline of DTP skills range from technical skills such as  prepress production  and  programming  to creative skills such as  communication design  and  graphic image development. Terminology There are two types of pages in desktop publishing,  electronic pages  and virtual paper pages to be printed on  physical paper pages. All computerized documents are technically electronic, which are limited in size only by  computer memory  or  computer data storage  space. Virtual paper pages will ultimately be  printed, and therefore require paper parameters that coincide with  international standard physical paper sizes  such as A4, letter, etc., if not custom sizes for trimming. Some desktop publishing programs allow custom sizes designated for large format printing used in  posters,  billboards  and  trade show displays. A virtual page for printing has a predesignated size of virtual printing material and can be viewed on a monitor in  WYSIWYG  format. Each page for printing has trim sizes (edge of paper) and a printable area if  bleed printing  is not possible as is the case with most  desktop printers. A  web page  is an example of an electronic page that is not constrained by virtual paper parameters. Most electronic pages may be dynamically re-sized, causing either the  content  to scale in size with the page or causing the  content to re-flow. Master pages are templates used to automatically copy or link elements and graphic design styles to some or all the pages of a multipage document. Linked elements can be modified without having to change each instance of an element on pages that use the same element. Master pages can also be used to apply graphic design styles to automatic page numbering. Page layout  is the process by which the elements are laid on the page orderly, aesthetically, and precisely. Main types of components to be laid out on a page include  text, linkedimages  that can only be modified as an external source, and embedded images that may be modified with the layout application software. Some embedded images are  rendered  in the application software, while others can be placed from an external source image file. Text may be  keyed  into the layout, placed, or (with  database publishing  applications) linked to an external source of text which allows multiple editors to develop a document at the same time. Graphic design styles such as color, transparency, and filters, may also be applied to layout elements.  Typography  styles may be applied to text automatically with  style sheets. Some layout programs include style sheets for images in addition to text. Graphic styles for images may be border shapes, colors, transparency, filters, and a parameter designating the way text flows around the object called wraparound or runaround. Comparisons With word processing While desktop publishing software still provides extensive features necessary for print publishing, modern word processors now have publishing capabilities beyond those of many older DTP applications, blurring the line between  word processing  and desktop publishing. In the early days of  graphical user interfaces, DTP software was in a class of its own when compared to the fairly Spartan word processing applications of the time. Programs such as Word Perfect  and  WordStar  were still mainly text-based and offered little in the way of page layout, other than perhaps margins and line spacing. On the other hand, word processing software was necessary for features like indexing and spell checking, features that are common in many applications today. As computers and operating systems have become more powerful, vendors have sought to provide users with a single application platform that can meet all needs. With other electronic layout software In modern usage, DTP is not generally said to include tools such as  TeX  or  troff, though both can easily be used on a modern desktop system and are standard with many  Unix-like operating systems and readily available for other systems. The key difference between electronic  typesetting  software and DTP software is that DTP software is generally interactive and WYSIWYG  in design, while older electronic typesetting software tends to operate in  batch mode, requiring the user to enter the processing programs markup language manually without a direct visualization of the finished product. The older style of typesetting software occupies a substantial but shrinking niche in  technical writing  and textbook publication; however, since much software in this genre is freely available, it can be more cost-effective than the professionally-oriented DTP systems. It is also particularly suitable for corporate newsletters or other applications where consistent, automated layout is important. One of the early and comprehensive reference books on the art of Desktop Publishing is Desktop Publishing For Everyone by K.S.V. Menon. This publication deals with virtually every facet of publishing and nearly all tools available as at the time of the publishing of this book in the year 2000. It is currently out of print. There is some overlap between desktop publishing and what is known as  Hypermedia  publishing (i.e. Web design, Kiosk, CD-ROM). Many graphical  HTML editors  such as  Microsoft FrontPage  and  Adobe Dreamweaver  use a layout engine similar to a DTP program. However, some Web designers still prefer to write HTML without the assistance of a WYSIWYG editor, and only resort to such software, if at all, solely for complex layout that cannot easily be rendered in hand-written HTML code. DTP applications Adobe FrameMaker Adobe InDesign Adobe PageMaker CorelDRAW Corel Ventura iStudio Publisher Microsoft Office Publisher OpenOffice PageStream  (used to be Publishing Partner) QuarkXPress Ready,Set,Go Scribus Serif page plus

Saturday, October 12, 2019

The Use of Myths in the Film Scarface :: Movie Film Essays

The Use of Myths in the Film Scarface When I began thinking about the use of myths in the Howard Hawks film, Scarface, my first thoughts were about the portrayal of the myth of the American Dream. I started to write about it but then I began thinking about how I could relate this film to Greek Mythology. I thought of some interesting parallels between this story and the story of Icarus. In mythology Icarus is the son of the craftsman, Daedalus. King Minos of Crete imprisons Icarus and his father in a labyrinth that Daedalus, himself, created. To escape, Daedalus crafts two pairs of wings from wax and feathers. Daedalus warns his son not to fly to close to the sun because it will melt the wax. Icarus doesn’t heed the warning of his father and falls to his death in the sea. In Scarface, Tony Camonte is a gangster on the rise in the world of organized crime. He builds an empire through murder and deceit and ends up dying in a barrage of police gunfire. In the movie, Tony represents Icarus. Tony seeks to create his empire through by any means necessary. He comes up from the humble beginnings of being a poor Italian immigrant to ultimately becoming a powerful mob boss. Through alienating all those close to him, he builds his own labyrinth around himself, which can be thought of as his steel fortress. He tries to escape by crafting wax wings in the form of an insatiable thirst for power. He thinks that if he just has more money or more power he will be able to escape his inevitable fate. He ignores the countless pleas of his mother to straighten up his life. Her character can be seen as Daedalus, she makes a sincere effort to steer her son to safety, but ultimately it is his decision and he ends up flying to close to the sun.

Friday, October 11, 2019

Renaissance quizz

Renaissance What was one of the chief aims of Italian Renaissance art? Realistic portrayal of individual persons, especially the human nude What was considered to be most important in education of â€Å"Christian Ladies†? Domesticity or asceticism What is a fresco? Method of painting water-based pigments on freshly applied plaster, usually on wall surfaces. What was the purpose of liberal education? Liberal studies were viewed as the key to freedom, which allowed humans to achieve heir goals and reach their full potential. What was the aim off humanist education?Humanist education was thought as being an important factor to the preparation of life. Its main goal was to improve the lives of citizens and help their communities. What did Donated do in Rome? With Michelson he produced a series of works, including the tomb of Pope John XIII in the Baptistery, Florence, and the tomb of Cardinal Britannica in S. Angelo a Nil, Naples. What was Renaissance art influenced by? Humanism W hat did Renaissance artists seek to imitate? They tried to imitate nature and real life in their work.In politics, the Renaissance contributed the development of the conventions of diplomacy, and in science an increased reliance on observation. Historians often argue this intellectual transformation was a bridge between the Middle Ages and the Modern era. Although the Renaissance saw revolutions in many intellectual pursuits, as well as social and political upheaval, it is perhaps best known for its artistic placements and the contributions of such polymaths as Leonardo dad Vinci and Michelangelo, who inspired the term â€Å"Renaissance man†.As a cultural movement, it encompassed innovative flowering of Latin and vernacular literatures, beginning with the 14th-century resurgence of learning based on classical sources, which contemporaries credited to Patriarch, the development of linear perspective and other techniques of rendering a more natural reality in painting, and grad ual but widespread educational reform. Renaissance quiz By legislation

Thursday, October 10, 2019

Professional Ethics Essay

1. Clearly, Dr. Conrad Hadenuf is not justified in his refusal to attend the substance abuse re-training program. His refusal to participate in the workshops merely because of his self-perceived superiority and achievements shows his negative and unprofessional attitude towards opportunities in improving his practice. His lack of interest and inactive participation during the workshop proper showed a very disturbing sign of the lack of ethical responsibility to clients wherein Hadenuff displayed how averse he is to learn more than the things he thinks he already knows. By dismissing the workshop as something that he does not need, Hadenuff also effectively deprives present and future clients with substance abuse problems with a practitioner who has an updated knowledge and skill in handling substance abuse issues. Indeed, the very reason for the existence of mandated continuing education as a requirement for license renewal is to encourage practitioners to maximize available learning opportunities so they can enhance the quality of service that they provide to clients. 2. I will refer the Chinese client to someone else who is familiar with the Chinese culture as my lack of experience and knowledge of Chinese might affect my ability to provide the client with the assistance and service that she needs. My unfamiliarity with the Chinese culture would clearly limit my ability to provide the client with quality counselling as my judgements and bias may come into conflict with Chinese values and norms. I would also inform the client that the referral is being made with her best interests in mind, and my limitations in understanding her background could impede my ability to assist her in coming up with an adequate and appropriate response to her problems. 3. I think that both Amy and Augustus are being unprofessional in their actions and attitudes. Both clearly had a weakness in establishing the proper boundaries for their relationship which has caused intimate feelings to be developed between them. Amy, as Augustus’ professor and individual supervisor, should not have encouraged Augustus’ attraction by giving him hope that it would end in a positive way. She should have told him right there and then that such a relationship would not only put her in a bad light among her colleagues and the institution she works for, but also violates her sense of professional ethics. If I were Amy’s colleagues, I would advise her not to pursue the relationship as it is imbalanced from the start. The uneven balance of power, wherein Augustus as a student, would tend to regard Amy as his superior by the mere fact that she was his professor and advisor, would clearly have an effect on an intimate relationship they are planning to have. It would not be appropriate for Amy and Augustus to date while the latter is still in the program, as it might have an impact on other students’ perception of Augustus’ status and performance in the program, although it might be acceptable once he has graduated. 4. I would not agree with the administration’s decision to keep my status as a student intern from my clients. It would be highly unethical and unprofessional to be dishonest to clients about the extent of my abilities and current capacities. Clearly, the rationale of the administrators are unacceptable as it violates the clients’ right to full discretion of the nature of service that they are being provided, including the status and the limitations of the counselor sent to them. By keeping the real status of my practice from my clients, I am violating their trust and confidence in my abilities and I could put them at risk for claiming to be a full-pledged counselling practitioner despite the truth. Thus, I would not accept the internship assignment of the community agency if accepting it would mean that I would have to be dishonest and would have to violate my potential clients’ right to full discretion of services which is unethical and unprofessional for counselling practitioners.

India: Foreign Trade Policy

India: Foreign Trade PolicyAlthough India  has steadily opened up its economy, its tariffs continue to be high when compared with other countries, and its investment norms are still restrictive. This leads some to see India as a ‘rapid globalizer’ while others still see it as a ‘highly protectionist’ economy.Till the early 1990s, India  was a closed economy: average tariffs exceeded 200 percent,  quantitative restrictions on imports  were extensive, and there were stringent restrictions on foreign investment. The country began to cautiously reform in the 1990s, liberalizing only under conditions of extreme necessity. Since that time, trade reforms have produced remarkable results. India’s trade to GDP ratio has increased from 15 percent to 35 percent of GDP  between 1990 and 2005, and the economy is now among the fastest growing in the world.Average non-agricultural tariffs have fallen below 15 percent, quantitative restrictions  on import s  have been eliminated, and foreign investments norms have been relaxed for a number of sectors. India  however retains its right to protect when need arises. Agricultural tariffs average between 30-40 percent, anti-dumping measures have been liberally used to protect trade, and the country is among the few in the world that continue to ban foreign investment in retail trade. Although this policy has been somewhat relaxed recently, it remains considerably restrictive.Nonetheless, in recent years, the government’s stand on trade and investment policy has displayed a marked shift from protecting ‘producers’ to benefiting ‘consumers’. This is reflected in its  Foreign Trade Policy for 2004/09  which states that, â€Å"For India to become a major player in world trade †¦ we have also to facilitate those imports which are required to stimulate our economy. â€Å"India  is now aggressively pushing for a more liberal global trade regime, e specially in services. It has assumed a leadership role among developing nations in global trade negotiations, and played a critical part in the Doha  negotiations.Regional and Bilateral Trade AgreementsIndia  has recently signed trade agreements with its neighbors and is seeking new ones with the East Asian countries and the United States. Its regional and bilateral trade agreements – or variants of them – are at different stages of development:   * India-Sri Lanka Free Trade Agreement, * Trade Agreements with Bangladesh, Bhutan, Sri Lanka, Maldives, China, and South Korea. * India-Nepal Trade Treaty, * Comprehensive Economic Cooperation Agreement (CECA) with Singapore. Framework Agreements with the Association of Southeast Asian Nations (ASEAN), Thailand and Chile. Preferential Trade Agreements with   Afghanista, Chile, and Mercosur (the latter is a trading zone between Brazil, Argentina, Uruguay, and Paraguay). World Bank InvolvementAs a number of research i nstitutions in the country provide the Government with good, just-in-time, and low-cost analytical advice on trade-related issues, the World Bank has focused on providing analysis on specialized subjects at the Government’s request.In the last three years, the Bank has been working with the Ministry of Commerce in a participatory manner to help the country develop an informed strategy for domestic reform and international negotiations. Given the sensitivity of trade policy and negotiation issues, the Bank’s role has been confined to providing better information and analysis than was previously available to India’s policymakers.World Bank ReportsOver the last two years, the World Bank has completed two reports:Sustaining India’s Services Revolution: Access to Foreign Markets, Domestic Reforms and International Negotiation:  The study concludes that  to sustain the dynamism of India’s services sector, the country must address two critical challen ges: externally, the problem of actual and potential protectionism; and domestically, the persistence of restrictions on trade and investment, as well as weaknesses in the regulatory environment.From Competition at Home to Competing Abroad: The Case of Horticulture in India:  This study finds that the competitiveness of India’s horticulture sector depends critically on efficient logistics, domestic competition, and the ability to comply with international health, safety and quality standards. The study is based on primary surveys  across fifteen Indian States. A third study, dealing with barriers to the movement of professionals is under preparation.The Bank has also held a number of workshops and conferences with a view to providing different stakeholders with a forum to express their views on trade-related issues. | | | | | Permanent URL for this page:  http://go. worldbank. org/RJEB2JGTC0| | Publications| * Studies on India-Bangladesh Trade (Vol. 1 of 2)   * Studie s on India-Bangladesh Trade (Vol. 2 of 2)   * Sustaining India's Services Revolution  | | | | | | * Home  |   * Site Map  |   * Index  |   * FAQs  |   * Contact Us  |   * Search  |   *   RSS|

Wednesday, October 9, 2019

Rotational Viscometer Essay Example | Topics and Well Written Essays - 1500 words

Rotational Viscometer - Essay Example On the other side, the importance of fluids having different properties will be looked at from the angle of engineering by relating the viscosity of different fluids to the ability to work. The project covers in detail the properties of selected fluids, how their viscosity is affected by the properties and any other effect of viscosity on other factors. At last, after knowing the importance of fluid properties in relation to engineering, various equipment different in design and workability are discussed, followed by the positive thought on the engineering and the properties of fluids (Partington, 1952). A fluid can be either a liquid or a gas and understanding its properties enables the understanding of their expected behavior under different environmental conditions. A fluid flows or deforms under a given shear force and in most cases tend to occupy and take the shape of the container in which they are put. In every field of engineering, aspects of deep thinking and calculations are evident aimed at ascertaining the real conditions under which the different fluids can work to determine the right fluid to be used in a given section of equipment. Fluid mechanics study how fluids react to a different force. For example, the environmental engineers use it to study forest fires, pollution dispersion, weather patterns that aid in weather forecasting, oceanography and volcano behavior. By understanding the properties of fluids, they are able to draw conclusions on the expected damage or amount of effect to be caused, and the relative appropriate method to be used in combating natural cal amities with the efficiency of the fluids to be used as shields (Reid & Sherwood, 1958). Engineers design equipment that use fluids, transport or operate in fluid environments such as pacemakers and engines. Understanding the behavior and properties of fluids enables them to selectively use a fluid that is suited to the machine, harmless and with high working

Tuesday, October 8, 2019

Ethical aspects of science Essay Example | Topics and Well Written Essays - 1000 words

Ethical aspects of science - Essay Example In an academic context, ethics needs to be considered as ‘an area of study that deals with ideas about what is good and bad behaviour’. Ethics in the academic context is commonly considered to be a branch of philosophy that deals with what is right and what is wrong from a moral point of view.   In general, ethics needs to be considered as all the moral principles that may influence our decisions and correct our behaviour. It needs to be pointed out that these principles can include working, eating, communicating with other people, studying, and so forth.   These principles are meant to keep our own lives and lives of people around in the right order. That is why, since the ancient times people had been expected to follow the rules of ethics and to encourage others to do the same. However, it is necessary to keep in mind that modern world is a complicated place where everything changes fast.   Consequently, the need to adopt ethical theories to the new conditions o f life arises.   Technologies and science develop new ideas faster than ever, and one of the major concerns of science in a context of ethics is a field of biomedical research.   Dramatically fast development of biomedical technologies that happened during the last twenty years produced a huge amount of ethical issues. It is necessary to mention that there is a list of reasons explaining why adherence to ethical norms is so important in a field of research.  Firstly, the aims of any research are knowledge, avoidance of errors.